FT Dual Power Driver

• Description
• Downloads

• The FT Dual Power Driver (DPD) is a current amplifier module that allows you to drive loads that require high currents using low power outputs from the PowerFT ECU for control.
  
  
•  
•  FT Dual Power Driver Manual

Description

The DPD can control electronic wastegates and other actuators that require up to 25A, consult our technical support for information on other applications.

It has two half-bridge outputs, being able to control one electric motor/actuator in two directions or two motors/actuators in one direction. Capable of controlling high-speed PWM (using ECU PWM output).

Datasheet

The FT Dual Power Driver has two half-bridge outputs that allow the activation of outputs of up to 25A.

The DPD allows two electric motors to be driven in one direction or one motor in two directions, as is the case with electronic wastegates .

Its hardware allows drives with low response delay, allowing use in controls that use a high-speed PWM signal.

• Power: 9V to 30V
• Maximum current: 25A DC (driver total)
• Peak Current: 100A for 10ms
• Input signal voltage: 9V to 30V
• Freq. Maximum operating speed: 25 KHz at 30V
• LOW input level: below 1.3V
• HIGH input level: above 1.6V
• Output activation delay:
  - High to low signal: 5.6 μs
  - Low to high signal: 6 μs

Dimensions: 140mm x 80mm x 30mm

Weight: FT Dual Power Driver: 220 g

Package content:

• 1 FT Dual Power Driver;
• 1 Installation and operation manual;
• 1 fixing kit

Connector (optional) select at the time of purchase:

• FT Dual Power Driver Connector Kit