Adapter Harness Yamaha SVHO/SHO/HO 2008/2018

• Description
• Downloads

• Adapter harnesses are the perfect solution for those looking for a simple and quick installation of FuelTech modules. The Yamaha SVHO/SHO/HO 2008 to 2018 adapter harness facilitates the installation of an FT550 ECU, replacing the original ECU, enabling the connection of the FT550 with the watercraft's original harness. Simply download the free base map for your Yamaha watercraft and you'll be ready to start off under FT control.
  
  

• Manual Harness Adapter Yamaha SVHO/SHO/HO 2008/2018.
  
  

DESCRIPTION:

The Yamaha SVHO/SHO/HO 2008 to 2018 "plug and play" adapter harness makes installing an FT550 on a Yamaha watercraft an easy and quick task, with an easy return to originality, as it uses the original harness, without the need for irreversible modifications. . In just a few minutes you can install a FuelTech ECU on your Yamaha SVHO/SHO/HO watercraft and, by downloading the map from the website, you will be ready to start. The FT550 has incredible datalogger and engine control capabilities, with practically infinite possibilities for customizing each of the controls and adjustments, especially when compared to an original ECU.

It is also possible to configure several driving modes, for more or less experienced pilots, similar to a valet mode in cars, which limits the throttle opening or even changes its response curve according to the desired behavior of the boat.

For watercraft that have a broadband probe installed in the exhaust, the plug and play harness offers connection to the WB-O2 Nano probe reader, to use the FT550 's fuel closed loop function, which guarantees protection with any fuel and any level of preparation. In addition to all this, the harness communicates with the original Yamaha CAN network and receives gear position information (R, N and F) in addition to the TRIM position for display in the log, FT screen and original panel.

The FT sends an RPM signal to the original watercraft dashboard and also communicates with the Ride system (brake and intelligent reverse) in addition to receiving driving mode selection information from the original instrument panel. The harness has two EXTRA connectors (INPUTS AND OUTPUTS) with unused inputs and outputs that must be installed and configured according to the application:

• EXTRA INPUTS connector: 3 white inputs, CAN A (HI and LO), signal negative, 5V for sensors and 12V post-relay for sensors.
  
• EXTRA OUTPUTS connector: 4 blue outputs, 2 yellow outputs, power ground and 12V post-relay.
  
  Plug and play harness connections:
  FT550 module (connectors A and B)
  WB-O2 Nano or NanoPRO module (reader and probe)
  EXTRA INPUTS and OUTPUTS connectors with unused inputs and outputs.
  
  
  

SPECIFICATIONS:

The adapter harnesses are easy to install, they replace the original ECU with an adapter harness that is connected to an FT550 ECU. Uses the vehicle's original harness, reducing the time required for installation.

APPETIZER:

All the features of an FT550 The adapter harness uses the following inputs from the original watercraft harness:

• TPS (electronic throttle and throttle)
• External MAP – original to the watercraft
• Air temperature (IAT)
• Engine temperature (ECT)
• Reverse sensor
• Handlebar position sensor
• wake mode button
• Exhaust temperature
• Rotation Sensor (RPM / CRANK)
• Phase Sensor (CAM)
• EXTRA INPUTS connector with unused inputs
  
  

OUTPUTS:

The adapter harness uses the following outputs from the original watercraft harness:

• Primary Injectors (4) - sequential
• Reels (4) - sequential
• Fuel pump
• EXTRA OUTPUTS connector with unused outputs

DASHBOARD:

The ECU can be installed to serve as an instrument panel. The adapter harness can be used in conjunction with an FT550 LITE if the customer does not wish to use it as an instrument panel.

OTHER FUNCTIONS:

Progressive nitrous control, launch control, turbo pressure control, electronic throttle control (fully customizable pedal x throttle curves and response speed).

PROTECTIONS AND ALERTS:

Excess engine temperature, excess oil temperature, excess rpm, drop in oil pressure (via original oil switch.

GENERAL FEATURES:

• STANDARD MAP FOR OPERATION (ready to start and drive, fine adjustment must be made for each application)
• Easy installation
• Easy to return to originality.
  
  

APPLICATION:

• FT550 ECU
• LAMBDA BROADBAND PROBE
• WB-O2 NANO or NanoPRO
  
  

PACKAGE CONTENT:

• 1 Plug and Play harness
• 1 user manual