WB-O2 Datalogger

• Description
• Downloads

• Meter and conditioner of signals from a broadband lambda probe for combustion engines and with an integrated data acquisition system. Six channels for reading and recording engine parameters.
• WB-O2 Datalogger Manual

Description

• 6-channel data acquisition system
• Broadband lambda probe reader and conditioner
• 6 recording channels: Lambda (internal), RPM and 4 analog channels (0-5V)
• USB connection for configuration via PC (no serial adapter required)
• Sampling rate up to 100Hz
• Memory for up to 7 hours of recording (at lowest sampling rate)
  
  

Datasheet

• Windows compatible software
• Easy-to-view display that directly shows the value in lambda or AFR *
• Lambda 0-5V analog output for connection with any programmable injection system
• Compatible only with Bosch LSU 4.2 wideband lambda probe (part numbers 0258007057 or 0258007351)
• Bosch control and amplification circuit
• Lambda range shown on the display by default: 0.59 – 9.99 λ
• Analog output standard Lambda range: 0.59 –1.10λ
• Available Lambda ranges: 0.65-1.30; 0.65-4.00 and 0.65-9.99 (configurable via software)**
• Examples of readings: Turbo pressure before the cooler and in the engine, oil pressure, exhaust pressure, brake fluid pressure, coolant pressure, wastegate pressure, internal engine pressure (crankcase), throttle position (TPS), intake air temperature, air temperature before and after the cooler, engine temperature, exhaust gas temperature, spark plug temperature, engine speed, gearbox speed, front/rear axle speed, front/rear suspension shift, start stage button (two-step), etc.

*Configuration made at the factory according to the equipment language.
** * Operating Systems: Windows XP, Vista, 7 or 8 (32 or 64 bits).

Note: To read temperature or pressure sensors (VDO sensor/2-wire sensor) on an engine without electronic injection or equipped with a carburetor, ask us for a hardware modification (5V output) before purchase.

Dimensions:

• 97mm x 50mm x 30mm